High Precision Centerless Grinding Machine
A high-precision centerless grinding machine is a device that performs external cylindrical machining through a grinding wheel, a guide wheel, and their relative motion without a center support.
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Product Introduction
Introduction
A high-precision centerless grinding machine is a device that performs external cylindrical machining through a grinding wheel, a guide wheel, and their relative motion without a center support.
Specification
|
Product Name |
High Precision Centerless Grinding Machine |
|
Model |
MX-M1080B |
|
Plunge-feed |
|
|
Grinding Diameter |
5-80mm |
|
Max. Grinding Length |
140mm |
|
Through-feed |
|
|
Grinding Diameter |
5-80mm |
|
Grinding Wheel Specification |
P500x150x305mm |
|
Regulating Wheel Specification |
PSA300x150x127mm |
|
Grinding Wheel Speed |
1300r/min |
|
Regulating Wheel Speed |
10-200r/min |
|
Swivel Angle of Regulating Wheel |
|
|
Vertical |
-2°- +5° |
|
Horizontal |
0°- 3° |
|
Feed/Division |
0.0025mm |
|
Height From Centerline of Gri. Wheel & Reg. Wheel To Work Rest |
210mm |
|
Motor Power |
|
|
Grinding Wheel Motor |
15KW |
|
Regulating Wheel Motor |
1.5KW |
|
Power Supply |
3N 380V 50Hz Approximately 17.7kW |
|
Machine Dimension (L*W*H) |
1950x1580x1485mm |
|
Machine Weight |
About 3500Kg |
|
Accuracy (Standard Bars) |
|
|
Roundness |
0.002mm |
|
Cylindricity |
0.003mm |
|
Roughness |
Ra0.32μm |
Features
Expanded Single-Pass Cutting Contact
The P500×150×305 mm grinding wheel provides a wider axial contact width compared to narrower grinding wheels, allowing for a longer contact area covered in a single grinding pass.
Adaptable to Higher Tilt Angle Adjustment
The guide wheel's vertical tilt angle range is -2° to +5° (higher than the conventional +4°), expanding the workpiece axial feed angle adjustment range and thus changing the combination of feed speed and helical trajectory.
Suitable for Medium-Sized Working Conditions
A 15 kW motor with a speed of 1300 r/min provides power input under medium grinding wheel width (150 mm) conditions.
Applications
Automotive Parts: Used for machining medium-sized drive shafts, enabling consistent outer diameter dimensions in mass production.
Bearing Industry: Used for machining rollers and medium-sized bearing rings, compatible with continuous feed grinding.
Hydraulics and Seals: Used for machining plungers and mating parts, controlling contact conditions through trajectory adjustment.
General Machinery: Used for machining medium-diameter shaft parts, covering various production specifications.
FAQ
