Precision Surface Grinder Machine
The precision surface grinder (MX-250) performs surface grinding through the rotation of the grinding wheel and the reciprocating motion of the worktable. It is used for surface machining and dimensional correction of small and medium-sized workpieces.
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Product Introduction
Introduction
The precision surface grinder (MX-250) performs surface grinding through the rotation of the grinding wheel and the reciprocating motion of the worktable. It is used for surface machining and dimensional correction of small and medium-sized workpieces.
Specification
|
Model |
MX-250 |
|
|
Processing Capacity |
Table Size |
460x200mm |
|
Max. Grinding Length |
540mm |
|
|
Max. Grinding Width |
260mm |
|
|
Distance From Table Surface To Spindle Center |
470mm |
|
|
Max. Work Load |
100kgs |
|
|
Table |
Number of T-Slot |
14x1mmxN |
|
Table Speed |
7-25m/min |
|
|
Front And Rear Hand Wheel Feed |
0.02mm (1 grid) |
|
|
4mm (1 circle) |
||
|
Front And Rear Automatic Feed |
/ |
|
|
Fast Forward And Backward Movement |
/ |
|
|
Wheel |
Wheel Size |
φ205x6-20x31.75mm |
|
Spindle Speeds |
2850R.P.M (50HZ) |
|
|
3360R.P.M (60HZ) |
||
|
Up And Down Mechanism |
Up And Down The Handwheel Feed |
0.01mm (1 grid) |
|
2mm (1 rotation) |
||
|
Automatic Feed |
/ |
|
|
Rapid Up And Down Movement |
/ |
|
|
Motor |
Spindle Motor |
2x2(HxP) |
|
Up And Down The Drive Motors |
/ |
|
|
Hydraulic Motor |
/ |
|
|
Vacuuming Motor |
3/4x2(HxP) |
|
|
Cooling Motor |
1/8x2(HxP) |
|
|
Front And Rear Drive Motor |
/ |
|
|
Size |
Machine Height |
1775mm |
|
Floor Area |
1800x1400mm |
|
|
Net Weight |
1100kgs |
|
|
Gross Weight |
1300kgs |
|
Features
Thickness Control
Vertical feed of 0.01 mm and horizontal feed of 0.02 mm ensures that the thickness adjustment of the plane is performed in fixed increments.
Expanded Single-Pass Machining Range
Maximum grinding length of 540 mm and width of 260 mm is achieved by matching the table travel with the table size to achieve a larger plane coverage.
Continuous Grinding Path
Grinding wheel speed of 2850/3360 r/min, combined with a φ205×6–20×31.75 mm grinding wheel, ensures a continuous abrasive cutting path per unit time.
Applications
Mold Manufacturing: Used for machining mold reference surfaces and parting surfaces to achieve planar dimensional control.
Machining: Used for correcting part reference surfaces, providing reference surfaces for subsequent assembly.
Tools and Fixtures: Used for machining the planes of fixtures and cutting tools to control thickness consistency.
General Component Machining: Used for machining the planes of small and medium-sized metal parts to meet assembly and mating requirements.
FAQ
