CNC Centerless Grinding Machine
A CNC centerless grinder is a type of CNC machining equipment that uses the relative motion between a grinding wheel and a guide wheel to perform centerless grinding on the outer diameter of a workpiece.
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Product Introduction
Introduction
A CNC centerless grinder is a type of CNC machining equipment that uses the relative motion between a grinding wheel and a guide wheel to perform centerless grinding on the outer diameter of a workpiece.
Specification
|
Product Name |
CNC Centerless Grinding Machine |
|
Model |
MX-S150 |
|
Plunge-feed |
|
|
Grinding Diameter |
2-45mm |
|
Max. Grinding Length |
145mm |
|
Through-feed |
|
|
Grinding Diameter |
2-45mm |
|
Grinding Wheel Specification |
PSA400x150(200)x203mm |
|
Regulating Wheel Specification |
P250x150(200)x127mm |
|
Grinding Wheel Speed |
1625r/min |
|
Regulating Wheel Speed (stepless) |
10-200r/min |
|
Regulating Wheel Frame Swivel Angle |
|
|
Vertical |
-2°- +5° |
|
Horizontal |
-1°- +3° |
|
Regulating Wheel Min Feed Amount |
0.001mm |
|
Grinding Wheel Dresser Min Feed Amount |
0.001mm |
|
Height From Centerline of Gri. Wheel & Reg. Wheel To Work Rest |
190mm |
|
Water Flow |
25L/min |
|
Total Power |
|
|
Grinding Wheel Motor |
11KW |
|
Regulating Wheel Motor |
1.5KW |
|
Water Pump Motor |
0.25KW |
|
Lubrication Pump Motor |
0.09KW |
|
Magnetic Coolant Separator Motor |
0.18KW |
|
Power Supply |
3N 50Hz 380V |
|
Machine Dimension (LxWxH) |
2600x1900x1500mm |
|
Machine Weight |
About 3000Kg |
|
Accuracy (Standard Bars) |
|
|
Roundness |
0.001mm |
|
Cylindricity |
0.0018mm |
|
Roughness |
Ra0.16μm |
Features
Small Diameter Machining
Grinding diameter range of 2–45 mm and grinding wheel speed of 1625 r/min allows small-diameter workpieces to achieve high contact linear velocity per unit time to meet continuous machining requirements.
Low Footprint Requirement
The overall machine dimensions are 2600×1900×1500 mm, and the weight is approximately 3000 kg, resulting in relatively controlled requirements for installation space and foundation load-bearing capacity.
Low Cooling Consumption
The coolant flow rate is 25 L/min, corresponding to a smaller cooling system capacity and lower liquid consumption requirement.
Applications
Electronic component manufacturing industry: Used for machining the outer diameter of miniature shafts and pins to meet assembly dimensional requirements.
Medical device manufacturing industry: Used for machining small-diameter stainless steel parts to form their outer geometric shapes.
Precision hardware machining industry: Used for batch processing of pins and fasteners to achieve dimensional consistency control.
Home appliance parts industry: Used for machining thin shafts for motors and other parts to meet the assembly requirements of rotating components.
FAQ
No Information
