Manual Automatic Integrated Surface Grinder

 

The Manual Automatic Integrated Surface Grinder is a composite surface grinder that integrates manual operation and automatic grinding functions, suitable for multi-variety processing and batch production switching scenarios.

 

 

Model			MX-618	MX-820	MX-1022(A/B)
Bench	Table size(L*W)		460x180mm	450x200mm	520x250mm
	Max. travel of table (L*W)		500x190mm	470x220mm	540x260mm
	Table Max. cutting area (L*W)		500x190mm	470x220mm	540x250mm
	Number of T-slot		1x14mm	1x14mm	1x14mm
The Grinding Head	Distance from table surface to spindle center		335mm	430mm	430mm
	Wheel size (dia*width*bore)		Φ180x13xΦ31.75mm	Φ200x20xΦ31.75mm	Φ200x20xΦ31.75mm
	Spindle speeds (50Hz)		2800r/min	2800r/min	2800r/min
The Amount of Feed	Table longitudinal(left and right) speed (stepless)		3-23m/min	3-23m/min	3-23m/min
	Table horizontal (before and amount after) the amount of feed	Continuous(variable speed)	150mm/min	150mm/min	150mm/min
		Intermittent(stepless)	0-5mm/Times	0-5mm/Times	0-5mm/Times
		The handwheel rotates	2.5mm	2.5mm	2.5mm
		Hand wheel each grid	0.02mm	0.02mm	0.02mm
	Vertical (up and down) feed wheel feed	The handwheel rotates	1.25mm	1.25mm	1.25mm
		Hand wheel each grid	0.01mm	0.01mm	0.01mm
Motor Power	The total input power		150W	150W	150W
	X-feeder output speed		0-225/min	0-225/min	0-225/min
	X-feeder size		280x130x120mm	280x130x120mm	280x130x120mm
	Y-feeder output speed		0-120/min	0-120/min	0-120/min
	Y-feeder size		280x130x120mm	280x130x120mm	280x130x120mm
Hydraulic System	Spindle motor		1.1kw	1.5kw	1.5kw
	Cooling motor		0.04kw	0.04kw	0.04kw
Working Precision	The machined surface of the base of parallelism		300/0.005mm	300/0.005mm	300/0.005mm
	Surface roughness		Ra0.32μm	Ra0.32μm	Ra0.32μm
Weight of Machine	Net weight		750kg	800kg	880kg
	Gross weight		800kg	890kg	980kg
Packing size(L*W*H)			1240x1080x1900mm	1460x1160x1960mm	1500x1200x1980mm

 

 

Manual + Automatic Dual-Mode Switching: Meets different needs for debugging and batch processing

 

High Operational Flexibility: Manual mode facilitates single-piece and complex workpiece processing

 

Automatic Feed System: Improves processing efficiency and consistency

 

Precision Grinding Capability: Achieves high flatness and good surface roughness

 

High Rigidity Structure: Utilizes high-strength cast iron (such as Mehran cast iron) and undergoes secondary artificial aging treatment to ensure long-term stability of the machine tool.

 

 

Mold repair and small-batch production

Precision machining of hardware parts

General equipment for machining workshops

Teaching and process trial production

Multi-variety, small-batch processing scenarios

 

(Especially suitable for customers who require both flexible operation and a certain degree of automation efficiency)

 

 

Worktable dimensions (e.g., 6×18 / 8×24 / 400×800, etc.)

Automation level (semi-automatic / automatic upgrade)

Control system configuration (basic electrical control / PLC)

Disk type (permanent magnet / electromagnetic)

Spindle and motor configuration

Cooling system and protective devices

Voltage and appearance customization

 

 

Pre-sales: Recommending manual/automatic configuration ratios based on processing type.

 

In-sales: Strict assembly and debugging processes.

 

After-sales: Long-term supply of key components; rapid response after-sales service.